MER_front  MER_rear

Detector signal controlled eluent recovery
  • Return of the mobile phases e.g. depending on quaternary pump from the detector signal and the selected channel
  • Easy installation, only data connection to the analog detector output. When using the satellites, the BCD-board is also required.
  • Fully compatible with all 1100/1200 systems from Agilent Technologies
  • Valve control via detector signal via BCD-board and software (including Chemstation, EZ-Chrom (from Ver.3.3))
  • Savings of up to 75% of the eluent in isocratic separations or time programmed rinsing
  • Easy setup of recycling on peak height and switching delay (to adjust the capillary length)
  • Software independent control of peak detection, control of the satellite about the software (method)
  • Trouble-free security cable (plug fully insulated, shielded cable)

Key data

Recycling valve
  • Electromagnetic control, 3-way, no dead volume
  • Wetted parts: all PTFE / PEAK
  • Type: ¼ "- 28 flat bottom (valve can be used in all directions)
  • Maximum pressure up to 30 psi (2 bar)
Physical characteristics
  • Power supply: 110 - 230VAC, 50/60Hz
  • Ambient temperature: 4.4 - 35 ° C, 10% - 60% relative humidity (non-condensing)
  • Dimensions (L x W x H): 230 x 68 x 158mm
  • Weight: 1.0 kg
Scope of delivery
  • 1-valve box
  • BCD board (optional)
  • BNC data cable
  • power supply
  • Couplings and fittings for 1/16'' capillaries

Option-Nr: Description
001 valve corpus Teflon (Standard)
002 valve corpus PEEK
003 Netzteil EU (Standard)

Copyright AnaTox 2013